Everett Concrete Experts

Concrete Slab Contractor in Everett, WA

Level, reinforced concrete slabs for garage floors, sheds, workshops, hot tubs, ADUs and equipment pads. Every slab we pour in Everett and Snohomish County is sized for the weight it will carry and built on a compacted base that will not sink.

Request a free concrete slab quote

Share a few details about your slab and we will call to schedule a visit.


    Rather speak to someone? Call (425) 204-7056

    Concrete Slabs Built for Strength and Stability

    A concrete slab may look simple, but it is a structural element. It has to carry weight, resist moisture and stay perfectly level for decades. We pour residential and commercial slabs throughout Everett, each designed for its exact purpose, from a small shed pad to a full garage or shop floor.

    Most slab failures start underneath. Soft soil, a thin or loosely compacted base, or water pooling below the concrete all lead to sinking and cracking. We prepare every site for local soil and rainfall, then choose the thickness and reinforcement your slab actually needs.

    Workers leveling a freshly poured concrete slab in Everett, WA

    What Goes Into a Long-Lasting Slab

    These four details decide whether your slab stays flat and solid or starts cracking and settling.

    Compacted subgrade and base

    We strip topsoil and soft material, compact the ground and add crushed rock for drainage and support.

    Correct thickness

    A shed pad, garage floor and hot tub pad each need different thickness. We match it to the load.

    Properly placed steel

    Wire mesh or rebar set on supports so it sits inside the slab, where it actually adds strength.

    Control joints and curing

    Joints guide cracking into clean, hidden lines, and careful curing lets the slab reach full strength.

    Concrete finisher troweling a new slab

    How Thick Should Your Concrete Slab Be?

    The right thickness depends on the load, the soil underneath and how the slab will be used. These are common starting points, and we fine-tune every slab for your site.

    Patios and walkways: 4"

    Plenty of strength for foot traffic, furniture and grills.

    Shed pads: 4"

    Standard sheds and storage buildings with light to moderate loads.

    Driveways: 4" to 5"

    Cars and SUVs, with added thickness for pickups and work trucks.

    Garage floors: 5" to 6"

    Vehicles, storage, daily wear and room for a car lift if needed.

    Hot tub pads: 6"

    Handles the concentrated weight of a filled tub and bathers.

    Heavy equipment: 6" to 8"

    RVs, trailers, machinery and commercial loads.

    Workers tying steel rebar to reinforce a concrete slab

    Wire Mesh, Rebar or Fiber Reinforcement

    Concrete is very strong under compression but weak when it bends or pulls apart. Reinforcement adds the tensile strength that holds a slab together if small cracks form. Whatever we use, we set it on chairs or blocks so it ends up inside the concrete, not lying on the ground where it does little good.

    Welded wire mesh

    A steel wire grid ideal for most residential slabs that keeps hairline cracks tight.

    Steel rebar

    Our strongest option for garage floors, hot tub pads, heavy loads and weaker soils.

    Fiber reinforcement

    Synthetic fibers mixed into the concrete to limit surface shrinkage cracks, often paired with mesh or rebar.

    Concrete Slab vs. Gravel Pad for a Shed

    Putting up a shed or small outbuilding? Here is how a concrete slab compares with a gravel base.

    Concrete slab

    Gravel pad

    For sheds and workshops that will hold heavy tools or equipment, a concrete slab is the smarter long-term foundation.

    Need a Slab for a Garage, Shed or Hot Tub?

    Book a free on-site estimate. We measure, check the soil and recommend the right thickness and reinforcement.

    Our Concrete Slab Installation Process

    A step-by-step process where every layer plays a part in how long your slab lasts.

    1

    Site preparation

    We remove topsoil and unsuitable material to depth and compact the subgrade to prevent settling.

    2

    Gravel base

    A compacted crushed rock base is installed and graded to the correct level for drainage and support.

    3

    Vapor barrier and insulation

    Garage, basement and living-space slabs get a vapor barrier, plus rigid insulation for heated floors.

    4

    Forms and reinforcement

    Forms set the edges, height and thickness, and mesh or rebar is placed on supports inside the slab area.

    5

    Pour, screed and finish

    Concrete is placed, consolidated and screeded level, then floated and troweled or broomed to your finish.

    6

    Joints and curing

    Control joints are cut and the slab is kept moist and protected while it cures to full strength.

    Concrete Slab Cost Factors in Everett

    Slab pricing depends on the size and the job it needs to do. These are the main factors.

    Square footage

    A larger slab needs more concrete, base rock, forming and labor.

    Thickness and steel

    Thicker slabs with rebar for heavy loads cost more than a standard 4-inch slab with mesh.

    Site prep and access

    Removing old concrete, leveling a slope, poor soil or tight truck access add to the work.

    Vapor barrier and finish

    Vapor barriers, insulation and a smooth hard-troweled interior finish add to the price.

    Get an exact, itemized slab price with a free on-site estimate.

    Inspecting a new concrete slab on a job site

    Types of Concrete Slabs We Pour

    Each slab below is designed for its specific use, load and location on your property.

    Clean garage with a smooth concrete floor slab

    Garage floors

    Thick, reinforced slabs with a smooth, easy-to-clean finish, sloped so water and melting snow drain toward the door.

    Backyard shed that needs a level concrete pad

    Shed and outbuilding pads

    Level slabs sized to your shed, extending just past the walls so water never pools at the base.

    Hot tub on a reinforced outdoor pad

    Hot tub pads

    Thick, steel-reinforced pads that support a filled tub, with extra room to step in and out safely.

    Workshop garage with a car lift on a thick concrete slab

    Workshops and storage buildings

    Slabs designed for the building footprint and the weight of tools, vehicles and stored equipment.

    Finished basement built on a concrete floor slab

    Basement floors and additions

    Interior slabs with vapor barrier and reinforcement, tied into footings for new construction and additions.

    Outdoor pool surrounded by a concrete deck

    Pool surrounds and equipment pads

    Textured slabs that slope water away from the pool, plus level pads for pumps, heat pumps and generators.

    Concrete Slab FAQs

    Answers about thickness, hot tubs, vapor barriers, reinforcement, curing and permits.

    Have another question?

    Call our team and we will talk through your slab project.

    Most patios, walkways and shed pads are 4 inches. Garage floors are usually 5 to 6 inches, hot tub pads about 6 inches and heavy equipment slabs 6 to 8 inches, adjusted for your soil and load.

    Yes, when it is designed for one. A filled hot tub can weigh several thousand pounds, so we pour a thicker, reinforced pad on a compacted base with space to step in and out.

    Interior slabs for garages, basements and living spaces should have one to stop ground moisture from coming up through the floor. Most outdoor slabs do not need one.

    Wire mesh works for most patios, walkways and shed pads. We recommend rebar for garage floors, hot tub pads, heavy loads and weaker soils.

    You can walk on it in 24 to 48 hours. Wait about a week before setting heavy items or driving on it, as concrete keeps curing for about 28 days.

    Small outdoor slabs often do not, but slabs for garages, ADUs and some larger outbuildings may. We check Everett and Snohomish County rules and pull permits when needed.

    Get a Free Concrete Slab Quote

    Fill out the form or call us. We will visit, measure, check your soil and give you a clear written price with no obligation.

    Tell us about your slab project

    We will call you back to schedule a free site visit.


      Rather speak to someone? Call (425) 204-7056

      Scroll to Top